Concrete Repairs & Resurfacing

Restore worn concrete to a safe, clean finish. We repair cracks and spalls, level uneven slabs, and apply resurface coatings for driveways, walks, patios, and entries across Naples, Marco Island, and nearby communities. Correct prep, compatible materials, and finishes that hold up in SWFL.

parallax background

What's Included

  • Site assessment and moisture check
  • Cleaning, degreasing, and surface prep
  • Crack routing and structural repair where needed
  • Spall patching with compatible repair mortar
  • Leveling or feathering to blend elevations
  • Resurfacing system or overlay to spec
  • Texture and traction options for safety
  • Sealer or coating suited to SWFL climate

Repair types

  • Crack repair: routed, filled, and tooled to reduce telegraphing

  • Spall and edge patching: driveways, garage entries, slab edges

  • Surface leveling: grind high spots, fill low areas

  • Section replacement: saw cut and repour when failures are structural

  •  

Timeline & Prep

Most repairs are walkable within 24 hours. Vehicle traffic typically resumes after 48 to 72 hours depending on product and weather.

  1. Site review and scope confirmation

  2. Mechanical prep and cleaning

  3. Repairs, patching, and leveling

  4. Overlay or coating application

  5. Cure and seal per product guidance

Contact Us

Why builders and homeowners choose us

  • Thorough prep for better bond and durability

  • Systems matched to use case and climate

  • Clean edges and even texture for a finished look

  • Licensed and insured in Florida

  • Clear communication and dependable scheduling

Contact Us

FAQ

Can all cracks be made invisible?
We route and fill cracks and choose systems that reduce telegraphing. Some hairlines can reappear with movement. Control joints help manage this.

How do you choose between resurfacing and repour?
If the slab is structurally sound, resurfacing is a good option. If there is base failure or severe heaving, we recommend section removal and repour.

Will the surface be slippery?
We can add texture or a traction additive to the sealer. Pool decks and slopes receive extra attention.

How long does a resurface last?
With proper prep and maintenance, coatings and overlays provide years of service. Reseal cycles vary by sun and traffic, commonly 2 to 3 years.

Do you match existing color?
We can color wash or stain before sealing. Exact matches are not guaranteed, but we can blend for a consistent look.